| AMI UCTBL204CEW Mounted Units & Inserts | A:31 mm; d:28.58 mm; A2:40 mm; Designation of open end cover:SCOU206-18; Recommended tightening torque for set screw:3.7 Nm; L:108 mm; e:18 mm; Weight:1.12 kg; C0:11.2 kN; s1:15 mm; |
| AMI UCWTPL207-21MZ2B Mounted Units & Inserts | Y0:2.58; Brand:SNR; Y2:3.93; e:0.26; Static load, C0:113 kN; da max:52.4 mm; B:28 mm; Characteristic rolling element frequency, BSF:6.07 Hz; D:85 mm; Radial clearance class:CN; |
| AMI UEMTB205-16MZ20RF Mounted Units & Inserts | A2:44.4 mm; Designation of bearing:SUC207; L:116 mm; T max.:100 °C; s1:21.45 mm; N:14mm; A:33.5 mm; J:92 mm; e:19 mm; d:35 mm; |
| AMI UCHPL207-21B Hanger Unit Bearings | Recommended tightening torque for set screw:3.7 Nm; B:38.1 mm; A:31 mm; d:28.58 mm; Designation of bearing:UC206-18G2T04; L:108 mm; s1:19.05 mm; G:M6x1; N:12mm; A1:13 mm; |
| AMI UCF211-32TC Flange Block Bearings | C:29.6 kN; J:138 mm; N:14mm; Adapter sleeve reference:H2308; H:49.2 mm; s1:24.5 mm; B1:46 mm; N1:26 mm; Designation of housing:PE208N-; T max.:100 °C; |
| AMI UC309 Insert Bearings Spherical OD | Brand:NTN; Dynamic load, C:133 kN; Da max:167 mm; Characteristic inner ring frequency, BPFI:4.91 Hz; d:85 mm; rs min:3 mm; Fatigue limit load, Cu:3.85 kN; da max:112 mm; Nlim (grease):2,600 rpm; Min operating temperature, Tmin:-25 °C; |
| AMI UCFCS211-35NPMZ2 Flange Block Bearings | C:122.85 kN; T min.:-20 °C; A1:27 mm; Designation of bearing:UC316G2L3; s1:43 mm; d:80 mm; Recommended tightening torque for set screw:42 Nm; Designation of housing:F316-; B:86 mm; G:M10x1; |
| AMI UCFK202 Flange Block Bearings | H1:14.5 mm; Weight:0.75 kg; H:36.5 mm; s1:30.9 mm; d1:37.4 mm; d:25 mm; L1:39 mm; C:14 kN; Designation of bearing:EX205G2; N1:19 mm; |
| AMI UCF201-8C4HR23 Flange Block Bearings | L2:10 mm; A2:24 mm; C:14 kN; A1:12 mm; Designation of open end cover:SCOU205-15; N1:16 mm; Z:47.5 mm; H:89 mm; A5:19.7 mm; s1:17 mm; |
| AMI UCP208-24TC Pillow Block Bearings | S:11.8 mm; Z:39.3 mm; T max.:100 °C; N:16mm; Designation of housing:FA211N-; H:219 mm; G:M6x1; Recommended tightening torque for set screw:22 Nm; C:43.55 kN; L1:104 mm; |
| AMI UCTX12 Take Up Unit Bearings | Designation of housing:FLZ209-; H3:105; Designation of bearing:UC209-28G2L4; L:111 mm; J:148.5 mm; e:20 mm; A2:50.2 mm; N:14mm; T min.:-20 °C; A:36.5 mm; |
| AMI UKFL207+H2307 Flange Block Bearings | r1a max:0.6 mm; Nlim (oil):18,500 rpm; Fatigue limit load, Cu:2.55 kN; Axial rigidity:147 N/µm; Axial displacement K Factor:0.96; ra max:1 mm; da min:82 mm; Mass:0.64 kg; Preload value:0.76 kN; Min operating temperature, Tmin:-30 °C; |