| AMI UCPPL207-22MZ20RFW Mounted Units & Inserts | s1:27.8 mm; C0:29.2 kN; A2:64.4 mm; Weight:3.76 kg; Recommended tightening torque for set screw:22 Nm; B:55.6 mm; Designation of bearing:UC211G2T20; N:18mm; C:43.55 kN; d:55 mm; |
| AMI UCF201-8C4HR23 Flange Block Bearings | L2:10 mm; A2:24 mm; C:14 kN; A1:12 mm; Designation of open end cover:SCOU205-15; N1:16 mm; Z:47.5 mm; H:89 mm; A5:19.7 mm; s1:17 mm; |
| AMI UCLP207-22NPMZ2 Pillow Block Bearings | Da:129 mm; Static Load Rating:52.3 kN; Radius:1 mm; Dynamic Load Rating:32.5 kN; Oil Holes:2.5 mm; D:140 mm; B:16 mm; da:112 mm; d:100 mm; |
| AMI UCT207-21 Mounted Units & Inserts | Bearing Outer Ring Material:Steel; Bearing Series:206 Series; Base to Center Height:Not Applicable; Anti-Rotation Pin:Yes; Seal Type:Triple Lip; Bearing Bore Shape:Round; Brand:Baldor-Dodge; UPC:782476476083; Max Bearing Speed:5250 rpm; Ball Grade:Class 10; |
| AMI UEFL206-18NP Mounted Units & Inserts | r:0.6; C1:5 mm; T min.:-20 °C; C0:11.2 kN; m:5.5 mm; C:19 mm; D:62 mm; T max.:100 °C; G:1/4-28UNF; SW:3.18 mm; |
| AMI BFPL4CW Flange Block Bearings | n:320 mm; W1:466.5 mm; h1:264 mm; d3:120 mm; d1:115 mm; A2:50 mm; initial grease quantity:954 Volume_cmc; W2:120.5 mm; housing weight:93 kg; W:536.5 mm; |
| AMI UGFL307-23 Flange Block Bearings | L1:30 mm; H1:13 mm; G:M6x1; Recommended tightening torque for set screw:8 Nm; Designation of open end cover:SCOU207-20; d:31.75 mm; H2:95 mm; Z:60 mm; S:17.5 mm; s1:21.45 mm; |
| AMI UKFL309+HS2309 Mounted Units & Inserts | Characteristic rolling element frequency, BSF:4.07 Hz; Static load, C0:2.39 kN; Fatigue limit load, Cu:0.15 kN; Radial clearance class:C3; f0:13.2; ra max:0.3 mm; Min operating temperature, Tmin:-20 °C; Nlim:18,000 rpm; Characteristic outer ring frequency, BPF0:3.07 Hz; D:28 mm; |
| AMI MUCWTPL204-12B Take Up Unit Bearings | H:98 mm; T max.:200 °C; C0:15.2 kN; C:25.7 kN; L1:225 mm; SW:3.97 mm; T min.:-20 °C; Designation of housing:SP206-207/72-; d:31.75 mm; G:R1/8"; |
| AMI UCNFL207-23MZ2B Flange Block Bearings | A2:78 mm; B:75 mm; J:166 mm; e:33 mm; Weight:8 kg; A:58 mm; T max.:100 °C; G:M6x1; T min.:-40 °C; A1:22 mm; |
| AMI UCFB210-31NPMZ2 Flange Block Bearings | Designation of bearing:UC212-36G2; C:52.5 kN; N:20mm; T max.:100 °C; Recommended tightening torque for set screw:16.8 Nm; B:65.1 mm; Designation of housing:P212N-; G:M6x1; L1:70 mm; C0:32.8 kN; |
| AMI UEEP212-39 Pillow Block Bearings | Designation of housing:FL205N-; N:16mm; L:68 mm; A2:35.5 mm; J:99 mm; B:27 mm; T max.:200 °C; A1:13 mm; d:22.22 mm; H:130 mm; |