| AMI UCNFL207-23MZ2B Flange Block Bearings | A2:78 mm; B:75 mm; J:166 mm; e:33 mm; Weight:8 kg; A:58 mm; T max.:100 °C; G:M6x1; T min.:-40 °C; A1:22 mm; |
| AMI UCP208-24TC Pillow Block Bearings | S:11.8 mm; Z:39.3 mm; T max.:100 °C; N:16mm; Designation of housing:FA211N-; H:219 mm; G:M6x1; Recommended tightening torque for set screw:22 Nm; C:43.55 kN; L1:104 mm; |
| AMI UCFA210-30TC Mounted Units & Inserts | d1:37.4 mm; L:70 mm; T max.:200 °C; B:34.8 mm; d:25.4 mm; H2:70 mm; J:50.8 mm; Weight:0.64 kg; C0:7.88 kN; C:14 kN; |
| AMI UEEP212-39 Pillow Block Bearings | Designation of housing:FL205N-; N:16mm; L:68 mm; A2:35.5 mm; J:99 mm; B:27 mm; T max.:200 °C; A1:13 mm; d:22.22 mm; H:130 mm; |
| AMI UCNFL206-19MZ20RFCEB Mounted Units & Inserts | C0r:58.5 kN; Minimum Buy Quantity:N/A; Inventory:0.0; Lw:19.8 mm; Characteristic outer ring frequency, BPF0:13.68 Hz; Characteristic rolling element frequency, BSF:17.74 Hz; Characteristic inner ring frequency, BPFI:15.32 Hz; Fw:42 mm; Nlim (grease):6,500 rpm; Nlim (oil):9,500 rpm; |
| AMI UCFC215 Flange Block Bearings | Brand:NTN; rs min:0.6 mm; Characteristic outer ring frequency, BPF0:4.12 Hz; Max operating temperature, Tmax:110 °C; Radial clearance class:C3; ra max:0.6 mm; Fatigue limit load, Cu:0.27 kN; Characteristic cage frequency, FTF:0.41 Hz; da min:29 mm; Dynamic load, C:10.1 kN; |
| AMI UCHPL207-21B Hanger Unit Bearings | Recommended tightening torque for set screw:3.7 Nm; B:38.1 mm; A:31 mm; d:28.58 mm; Designation of bearing:UC206-18G2T04; L:108 mm; s1:19.05 mm; G:M6x1; N:12mm; A1:13 mm; |
| AMI UKX17+HE2317 Insert Bearings Spherical OD | Recommended tightening torque for set screw:8 Nm; H2:107 mm; C0:20.8 kN; A:48 mm; T min.:-20 °C; Weight:1.95 kg; N:M12; G:R1/8"; Designation of bearing:US209-26G2; H1:14 mm; |
| AMI UCFT210 Flange Block Bearings | d:44.45 mm; H2:61 mm; S:21.4 mm; B:42.8 mm; A:31 mm; C0:20.8 kN; Designation of bearing:EX209-28G2L3; T max.:100 °C; d1:62 mm; Recommended tightening torque for set screw:8 Nm; |
| AMI UKPU311+H2311 Mounted Units & Inserts | Dynamic load, C:1,160 kN; E:283 mm; da max:190 mm; d1:211 mm; r1s min:4 mm; D:320 mm; Da max:304 mm; Static load, C0:1,600 kN; Characteristic cage frequency, FTF:0.4 Hz; Radial clearance class:C3; |
| AMI BTM207-20TCMZ2 Mounted Units & Inserts | G:R1/8"; Weight:1.13 kg; A2:45.4 mm; Z:30.9 mm; C:25.7 kN; B:42.9 mm; Recommended tightening torque for set screw:8 Nm; H:155 mm; s1:21.45 mm; A1:12.5 mm; |
| AMI UETFT207 Mounted Units & Inserts | da max:40 mm; Fatigue limit load, Cu:9.5 kN; Max operating temperature, Tmax:120 °C; Radial clearance class:C3; Minimum Buy Quantity:N/A; Characteristic rolling element frequency, BSF:4.47 Hz; Characteristic cage frequency, FTF:0.39 Hz; Inventory:0.0; Static load, C0:77.5 kN; Dynamic load, C:74.5 kN; |