No. | Brand | G | L | U | H | J | S | s | E |
F4B-DL-112 | DODGE | - | - | - | - | - | - | - | - |
TB-DLEZ-103-PCR | DODGE | - | - | - | - | - | - | - | - |
INS-SC-203-FF | DODGE | - | - | - | - | - | - | - | - |
EP4B-IP-208L | DODGE | - | - | - | - | - | - | - | - |
SF4S-S2-315RE | DODGE | - | - | - | - | - | - | 7 mm | - |
INS-DL-106 | DODGE | - | - | - | - | - | - | - | - |
P2B-GTM-215 MOD | DODGE | - | - | - | 18 mm | - | - | - | - |
F2B-SCEZ-106-PCR | DODGE | - | - | - | - | - | - | - | - |
WSTU-DL-115 | DODGE | - | - | - | 400.05 mm | - | - | - | - |
P4B520-ISAF-307LE | DODGE | - | - | - | - | - | - | - | - |
P2B-SCAH-100-FF | DODGE | Tr 1060x8 | - | - | - | - | - | - | - |
P2B-SD-207 | DODGE | - | 466.725 mm | - | - | - | - | - | - |
INS-SC-104-CR | DODGE | - | - | - | - | - | - | - | - |
INS-IP-203L | DODGE | - | - | - | - | - | - | - | - |
P4B-SD-615 | DODGE | - | 279.4 mm | - | - | - | - | - | - |
EP4B-IP-508R | DODGE | - | - | - | - | - | - | - | - |
FC-SC-108 | DODGE | Tr 500x5 | - | - | - | - | - | - | - |
EP4B-IP-600L | DODGE | - | - | - | - | - | - | - | - |
F4B-SD-208E | DODGE | - | - | - | - | - | - | - | - |
NSTU-SXR-110 | DODGE | M 72x4 | - | - | - | - | - | - | - |
F2B-GTEZ-107-SHCR | DODGE | - | - | - | - | - | - | - | - |
CYL-SXR-103 | DODGE | - | - | - | - | - | - | - | - |
FC-SXR-45M | DODGE | - | - | - | - | - | - | - | - |
F2B-DLEZ-104-SHCR MOD | DODGE | - | - | - | - | - | - | - | - |
DODGE WSTU-SCED-55M Mounted Units & Inserts | rb max.:0.6 mm; ra max.:0.3 mm; Mass bearing:0.2 kg; d:12 mm; a:55 mm; r1,2 min.:0.3 mm; K:2.5 mm; Static axial stiffnes:400 N/µm; Static moment stiffness:50 N·m/mrad; Basic static load rating C0:30 kN; |
1 Inch | 25.4 Millimeter x 1.188 Inch | 30.17 Millimeter x 1.438 Inch | 36.525 Millimeter DODGE P2B-SCAH-100-FF Pillow Block Bearings | Hydraulic nut:HMV 212 E; Nut for removal:HM 31/1060; B2:547 mm; d:1000 mm; Mass withdrawal sleeve:485 kg; A:15 mm; B1:525 mm; G:Tr 1060x8; d1:950 mm; G1:63 mm; Size (mm):1 Inch | 25.4 Millimeter x 1.188 Inch | 30.17 Millimeter x 1.438 Inch | 36.525 Millimeter ; |
DODGE BRG22310C3 Roller Bearings | Mass shaft washer:0.26 kg; d:45 mm; r1,2 min.:1 mm; d1:85 mm; B:8.25 mm; |
DODGE FC-SCM-103 Flange Block Bearings | B3:7 mm; d1:141 mm; Associated spanner:TMFN 23-30; Recommended grub screw tightening torque:35 N·m; Axial static load carrying capacity:365 kN; Grub (set) screw size:M10; d3:165 mm; Mass lock nut:1.51 kg; b:12 mm; h:5 mm; |
DODGE F4B-GTM-103 Flange Block Bearings | Fatigue load limit Pu:8.15 kN; B:20 mm; Basic dynamic load rating C:27 kN; Mass bearing:0.23 kg; Db:55.8 mm; db:54.5 mm; E:60 mm; r1,2 min.:0.6 mm; Limiting speed:8500 r/min; Basic static load rating C0:67 kN; |
DODGE INS-SC-203-FF Insert Bearings Spherical OD | Fillet Radius ra:1.50 mm; d:65.000 mm; Accessories:One Shield; Basic Static Radial Load Rating Co:40500 N; B:23.00 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; Sealed Speed Rating n3:3600 rpm; Grease Speed Rating n1:5300 rpm; D:120.0000 mm; Oil Speed Rating n2:6300 rpm; |
2.438 Inch | 61.925 Millimeter x 5.063 Inch | 128.59 Millimeter x 4 Inch | 101.6 Millimeter DODGE P2B-SD-207 Pillow Block Bearings | RG:1/2 NPT; L:466.725 mm; R2:36.513 mm; R1:79.375 mm; Pa:25.4 kN; A1:133.35 mm; P150°:68.1 kN; Ca:75.616 mm; H1:152.4 mm; Bearing:23030 CCK/W33; Size (mm):2.438 Inch | 61.925 Millimeter x 5.063 Inch | 128.59 Millimeter x 4 Inch | 101.6 Millimeter ; |
2.688 Inch | 68.275 Millimeter x 3.59 Inch | 91.186 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE SEP4B-S2-211RE Pillow Block Bearings | Mass pillow block:64 kg; L:419.1 mm; PosiTrac Plus contact element:2 x B10724-113; P90°:149 kN; Cap bolt:5/8-11 UNC; Max. speed for PosiTrac Plus seal:1350 r/min; End plug (suffix Y):EPR 14; Da:215.001 mm; Initial grease fill:379.89 g; Cap bolt, SAE grade:8; Size (mm):2.688 Inch | 68.275 Millimeter x 3.59 Inch | 91.186 Millimeter x 3.125 Inch | 79.38 Millimeter ; |
DODGE LD-20X18-TUFR-SSS Mounted Units & Inserts | d:260 mm; Mass angle ring:3.38 kg; B1:16 mm; B2:31.5 mm; d1 ≈:309.6 mm; r3,4 min.:4 mm; |
DODGE FC-SXR-108 Flange Block Bearings | Coefficient of friction µ min.:0.08; Specific static load factor K0:45 N/mm²; B:200 mm; Permissible sliding velocity v min.:0 m/s; Mass bushing:7.2 kg; D:140 mm; Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; a:10 mm; d:120 mm; |
6.938 Inch | 176.225 Millimeter x 13.5 Inch | 342.9 Millimeter x 11.25 Inch | 285.75 Millimeter DODGE P4B-SD-615 Pillow Block Bearings | Bearing:2213 EKTN9; Adapter sleeve assembly:SNW 13x2.3/16; ba:31.75 mm; Cap bolt:2 x 1/2-13 UNC; RG:1/8 NPT; Ca:39.014 mm; J max.:241.3 mm; J min.:206.375 mm; L:279.4 mm; h:30.163 mm; Size (mm):6.938 Inch | 176.225 Millimeter x 13.5 Inch | 342.9 Millimeter x 11.25 Inch | 285.75 Millimeter ; |
2.188 Inch | 55.575 Millimeter x 2 Inch | 50.8 Millimeter x 2.5 Inch | 63.5 Millimeter DODGE P2B-UN2-203E Pillow Block Bearings | Mass bushing:0.1 kg; Permissible sliding velocity v max.:1 m/s; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:f7 m/s; Coefficient of friction µ min.:0.08; Specific dynamic load factor K:40 N/mm²; Specific static load factor K0:120 N/mm²; B:30 mm; Tolerance housing:H7 m/s; Size (mm):2.188 Inch | 55.575 Millimeter x 2 Inch | 50.8 Millimeter x 2.5 Inch | 63.5 Millimeter ; |
DODGE F4B-DI-215RE Flange Block Bearings Video