No. | Brand | G | L | U | H | J | S | s | E |
EF4B-S2-207LE | DODGE | M 20x1.5 | - | - | - | - | - | - | - |
FC-SCM-103 | DODGE | - | - | - | - | - | - | - | - |
FB-GT-104 | DODGE | - | - | 30 mm | - | - | - | - | - |
F4B-GTM-70M | DODGE | M 95x2 | - | - | - | - | - | - | - |
P2B516-ISAF-211RE | DODGE | - | - | - | - | - | - | - | - |
P2B-SC-111 | DODGE | - | - | - | - | - | - | - | - |
P2B-SCAH-014 | DODGE | - | - | - | - | - | - | - | - |
SEF4B-IP-114RE | DODGE | - | - | - | - | - | - | - | - |
400058 | DODGE | - | - | - | - | - | - | - | - |
NS-407X9-TUFR | DODGE | - | - | - | - | - | - | - | - |
P4B-DI-300RE | DODGE | - | - | - | - | - | - | - | - |
EP4B-IP-600L | DODGE | - | - | - | - | - | - | - | - |
P4B-SD-214 | DODGE | - | - | - | - | - | - | - | - |
P4B520-ISAF-307LE | DODGE | - | - | - | - | - | - | - | - |
INS-GT-104S-CR | DODGE | - | - | - | - | - | - | - | - |
SP2B-IP-200RE | DODGE | - | - | - | - | - | 4.763 mm | - | - |
FB-SC-115 | DODGE | - | - | - | - | - | - | - | - |
INS-SC-104-CR | DODGE | - | - | - | - | - | - | - | - |
P4B-IP-304LE | DODGE | - | - | - | - | - | - | - | - |
S1U-EXL-500R | DODGE | - | - | - | - | - | - | - | 1310 mm |
F2B-SCED-100 | DODGE | - | - | - | 169.863 mm | - | - | - | - |
WSTU-DL-115 | DODGE | - | - | - | 400.05 mm | - | - | - | - |
F4S-IP-106L | DODGE | - | - | - | - | - | - | - | - |
P2B-SD-212E | DODGE | - | 117.475 mm | - | - | 88.9 mm | 0.794 mm | - | - |
F2B-DL-106 | DODGE | - | - | - | - | - | - | - | - |
DODGE INS-SXV-101 Insert Bearings Spherical OD | Design (sliding contact surface combination):Steel/PTFE FRP; da min.:766 mm; Da max.:974 mm; Specific dynamic load factor K:80 N/mm²; Basic static load rating C0:22400 kN; Sealing solution:-; r2 min.:6 mm; Lubricant:Maintenance free &nd; M:13 mm; b:35 mm; |
DODGE BRG22338C3 Roller Bearings | d1:670 mm; G:Tr 710x7; Lock nut:HME 30/710; Locking device:MS 30/710; B5:112 mm; B:90 mm; A:8 mm; G2:G 1/8; d3:830 mm; G3:13 mm; |
DODGE INS-IP-203L Insert Bearings Spherical OD | Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ max.:0.15; Specific static load factor K0:45 N/mm²; D:12 mm; d:6 mm; Coefficient of friction µ min.:0.08; B:6 mm; |
DODGE F4B-GTM-103 Flange Block Bearings | Fatigue load limit Pu:8.15 kN; B:20 mm; Basic dynamic load rating C:27 kN; Mass bearing:0.23 kg; Db:55.8 mm; db:54.5 mm; E:60 mm; r1,2 min.:0.6 mm; Limiting speed:8500 r/min; Basic static load rating C0:67 kN; |
DODGE INS-GT-100-CR Insert Bearings Spherical OD | Frame Accepts These Shaft Sizes (Bearing Bore):40 mm; Height G:3.938 in; Frame Size A:5 1/4 in; Shaft C/L Distance F:1 31/32 in; Frame Size B:10 in; Bolt Pattern E:8 1/2 in; Length H:0.625 in; Bolt Pattern D:2 3/4 in; Travel:3; Bolt Pattern C:0.55 in; |
1.378 Inch | 35 Millimeter x 1.752 Inch | 44.5 Millimeter x 1.874 Inch | 47.6 Millimeter DODGE TB-DLEZ-035M-PCR Pillow Block Bearings | D:240.0000 mm; Grease Speed Rating n1:2600 rpm; d:110.000 mm; Accessories:Seal & Snap-Ring; B:50.00 mm; Basic Static Radial Load Rating Co:180000 N; Sealed Speed Rating n3:1800 rpm; Grease Speed Rating Open/Shielded n1:2600 rpm; Oil Speed Rating Open/Shielded n2:3200 rpm; Fillet Radius ra:2.50 mm; Size (mm):1.378 Inch | 35 Millimeter x 1.752 Inch | 44.5 Millimeter x 1.874 Inch | 47.6 Millimeter ; |
DODGE BRG22310C3 Roller Bearings | Mass shaft washer:0.26 kg; d:45 mm; r1,2 min.:1 mm; d1:85 mm; B:8.25 mm; |
DODGE LD-20X18-TUFR-SSS Mounted Units & Inserts | d:260 mm; Mass angle ring:3.38 kg; B1:16 mm; B2:31.5 mm; d1 ≈:309.6 mm; r3,4 min.:4 mm; |
DODGE FC-SXR-108 Flange Block Bearings | Coefficient of friction µ min.:0.08; Specific static load factor K0:45 N/mm²; B:200 mm; Permissible sliding velocity v min.:0 m/s; Mass bushing:7.2 kg; D:140 mm; Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; a:10 mm; d:120 mm; |
DODGE WSTU-SCED-55M Mounted Units & Inserts | rb max.:0.6 mm; ra max.:0.3 mm; Mass bearing:0.2 kg; d:12 mm; a:55 mm; r1,2 min.:0.3 mm; K:2.5 mm; Static axial stiffnes:400 N/µm; Static moment stiffness:50 N·m/mrad; Basic static load rating C0:30 kN; |
DODGE SFC-IP-215RE Flange Block Bearings | Hydraulic nut:HMV 142E; d1:670 mm; d:710 mm; B5:135 mm; Locking device:MS 31/710; B1:467 mm; G2:G 1/8; A:8 mm; d3:900 mm; G3:13 mm; |
2 Inch | 50.8 Millimeter x 2.469 Inch | 62.7 Millimeter x 2.25 Inch | 57.15 Millimeter DODGE TB-SXR-200 Pillow Block Bearings | P60°:669 kN; Cap bolt recommended tightening torque:4284.4 N·m; Eye bolt:2 x 1/2-13 UNC; N1:41.275 mm; Pa:89 kN; Bearing:23056 CCK/W33; ba:100.806 mm; P120°:249 kN; End plug (suffix Y):X-5217-2; da:254 mm; Size (mm):2 Inch | 50.8 Millimeter x 2.469 Inch | 62.7 Millimeter x 2.25 Inch | 57.15 Millimeter ; |
DODGE WSTU-SXR-103-NL Take Up Unit Bearings Video